10' Long Footlocker shown closed (left), half-open (center) and open (right). Stainless steel pieces are water-jet cut and bent ninety degrees on a brake with a 1/2" radius. The surfaces are sanded with a non-directional finish and sealed with a matte clear coat. Photographer: Chad Loucks.
Wall-Mounted Night Table (set) shown closed (left) and open (right). Stainless steel drawer coverplates are flush when closed, and open with a push spring release. A light is mounted under the upper surface of each night table. Photographer: Chad Loucks.
Wall-mounted LCD Stand with Drawer and Cabinet shown closed (left), and open (right). Drawer interiors are finished birch plywood. Stainless steel plate (not shown) is wall mounted between LCD stand and dresser below (not shown) to conceal electrical wiring. Photographer: Chad Loucks.
Rolling Upright Credenza shown closed (left), and open (right). Top, base, and interior shelf are painted wood. Aluminum castors are mounted to base for convenience. Photographer: Chad Loucks.
Interloop Architecture was commissioned to design and fabricate seven pieces of stainless steel and wood furniture for a private residence in Richardson, Texas. The Polara (7) pieces are used in a master bedroom that includes an eight foot by eight foot cantelievered glass sunroom (Plug-On). The pieces include two wall-mounted night-stands, a footlocker, a rolling upright credenza, a head-board, a picture rail, and wall-mounted lcd stand with drawer and cabinet.
